Passar pointer de struct para funcao
Enviado: 30 Set 2010 07:31Estou tendo problemas para compilar o seguinte codigo:
beagle_spi.h
beagle_spi.c
O compilador aponta erro nas duas linhas do arquivo beagle_spi.h:
e nessas duas linhas do arquivo beagle_spi.c:
O que eu to fazendo de errado? Nao to conseguindo perceber nada. Alguem poderia me dar uma ajuda?
beagle_spi.h
- Código: Selecionar todos
#ifndef BEAGLE_SPI_H_GUARD
#define BEAGLE_SPI_H_GUARD
#include <stdio.h>
#include <stdlib.h>
#include <math.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <errno.h>
#include <sys/ioctl.h>
#include <linux/types.h>
/* File name for memory access */
#ifndef FILE_PINCONF
#define FILE_PINCONF "/dev/mem"
#endif
#define FILE_MCSPI "/dev/mem"
/* Base adresses */
#ifndef BASE_PINCONF
#define BASE_PINCONF 0x48000000
#endif
#define BASE_MCSPI1 0x48098000 // page 192 , page 2849 of OMAP3530 processor's manual
#define BASE_MCSPI2 0x4809A000
#define BASE_MCSPI3 0x480B8000
#define BASE_MCSPI4 0x480BA000
/* Other definitions */
#define SPISIZE 0x10000
/* SPI Register structure : bit field accessible (for future compatibility) */
//struct SPI_t {
// union { // Example on how to access bit fields in a 32-bit word
// ulong all;
// struct {
// unsigned minor:4;
// unsigned major:4;
// };
// } revision; // offset: 0x00
// ulong dump_0[3]; // jump: 0x04, 0x08, 0x0C
// union {
// ulong all;
// struct {
// unsigned autoidle:1; // bit [0]
// unsigned softreset:1; // bit [1]
// unsigned enawakeup:1; // bit [2]
// unsigned sidlemode:2; // bits [3:4]
// unsigned dump_0:3; // bits [5:7]
// unsigned clockactivity:2; // bits [8:9]
// };
// } sysconfig; // offset: 0x10
// union {
// ulong all;
// struct {
// unsigned
// };
// } sysstatus; // offset: 0x14
// union {
// ulong all;
// struct {
// unsigned
// };
// } irqstatus; // offset: 0x18
// ulong irqenable; // offset: 0x1C
// ulong wakeupenable; // offset: 0x20
// ulong syst; // offset: 0x24
// ulong modulctrl; // offset: 0x28
// struct { // channel structure (size 0x14)
// ulong conf; // offset: 0x2C + (0x14 * x)
// ulong stat; // offset: 0x30 + (0x14 * x)
// ulong ctrl; // offset: 0x34 + (0x14 * x)
// ulong tx; // offset: 0x38 + (0x14 * x)
// ulong rx; // offset: 0x3C + (0x14 * x)
// } channel[4];
// ulong dump_1[5]; // jump: from 0x40 to 0x78
// ulong xferlevel; // offset: 0x7C
//};
/* SPI Register structure : 32-bit (word) field accessible */
struct SPI_t {
ulong REVISION; // offset: 0x00
ulong dummy_0[3]; // jump: 0x04, 0x08, 0x0C
ulong SYSCONFIG; // offset: 0x10
ulong SYSSTATUS; // offset: 0x14
ulong IRQSTATUS; // offset: 0x18
ulong IRQENABLE; // offset: 0x1C
ulong WAKEUPENABLE; // offset: 0x20
ulong SYST; // offset: 0x24
ulong MODULCTRL; // offset: 0x28
struct { // channel structure (size 0x14)
ulong CONF; // offset: 0x2C + (0x14 * x)
ulong STAT; // offset: 0x30 + (0x14 * x)
ulong CTRL; // offset: 0x34 + (0x14 * x)
ulong TX; // offset: 0x38 + (0x14 * x)
ulong RX; // offset: 0x3C + (0x14 * x)
} CH[4];
ulong dummy_1[5]; // jump: from 0x40 to 0x78
ulong XFERLEVEL; // offset: 0x7C
};
/* SPI Register Vector : vector accessible (for backwards compatibility) */
//typedef ulong[SIZESPI] SPI_t;
/* Function prototypes */
SPI_t * spiopen (const ulong baseaddress);
ulong spigetc (SPI_t *spipointer, uint channel);
#endif
beagle_spi.c
- Código: Selecionar todos
#ifndef BEAGLE_SPI_C_GUARD
#define BEAGLE_SPI_C_GUARD
#include "beagle_spi.h"
SPI_t * spiopen (const ulong baseaddress) {
int fd;
fd = open(FILE_PINCONF, O_RDWR | O_SYNC);
if (fd < 0) {
printf("Could not open memory. Error: %d.\n", errno);
return(NULL);
}
/* Pad configuration: clocks must be previously enabled before accesing McSPI registers */
volatile ulong *pinconf;
pinconf = (ulong*) mmap(NULL, 0x10000, PROT_READ | PROT_WRITE, MAP_SHARED, fd, BASE_PINCONF);
if (pinconf == MAP_FAILED) {
printf("Pinconf Mapping failed. Error: %d.\n", errno);
close(fd);
return(NULL);
}
ulong mask;
switch (baseaddress) {
case BASE_MCSPI3:
mask = 0x00100000;
pinconf[0x2158/4] = (pinconf[0x2158/4] | 0x00000119); // pin configured as mcspi3_clk Page 853
pinconf[0x2158/4] = (pinconf[0x2158/4] | 0x01090000); // pin configured as mcspi3_simo Page 853
pinconf[0x215C/4] = (pinconf[0x215C/4] | 0x00000109); // pin configured as mcspi3_somi Page 853
pinconf[0x2160/4] = (pinconf[0x2160/4] | 0x01190000); // pin configured as mcspi3_cs0 Page 853
break;
case BASE_MCSPI4:
mask = 0x00200000;
/* Configure Expansion header pins as SPI output. */
pinconf[0x218C/4] = (pinconf[0x218C/4] | 0x00000119); // pin configured as mcspi4_clk Page 853
pinconf[0x2190/4] = (pinconf[0x2190/4] | 0x00000119); // pin configured as mcspi4_simo Page 853
pinconf[0x2190/4] = (pinconf[0x2190/4] | 0x01190000); // pin configured as mcspi4_somi Page 853
pinconf[0x2194/4] = (pinconf[0x2194/4] | 0x01190000); // pin configured as mcspi4_cs0 Page 853
break;
}
pinconf[0x4A00/4] = pinconf[0x4A00/4] | mask; // McSPI functional clock is enabled
pinconf[0x4A10/4] = pinconf[0x4A10/4] | mask; // McSPI interface clock is enabled
pinconf[0x4A20/4] = pinconf[0x4A20/4] & (mask ^ 0xFFFFFFFF); // McSPI can be accessed
fclose(fd);
fd = open(FILE_MCSPI, O_RDWR | O_SYNC);
if (fd < 0) {
printf("Could not open memory. Error: %d.\n", errno);
return(NULL);
}
SPI_t *mcspi;
mcspi = (SPI_t*) mmap(NULL, sizeof(SPI_t), PROT_READ | PROT_WRITE, MAP_SHARED, fd, baseaddress);
if (mcspi == MAP_FAILED) {
printf("McSPI Mapping failed. Error: %d.\n", errno);
close(fd);
return(NULL);
}
return(&mcspi);
}
ulong spigetc (SPI_t *spipointer, uint channel) {
spipointer->CH[channel].TX = 0x00000000; // Transmit dummy data (MUST ALWAYS BE 0x00000000 to avoid cross-talk)
while (!(spipointer->CH[channel].STAT | 0xFFFFFFFE)); // Wait for set bit in reception end flag
return (spipointer->CH[cahnnel].RX);
}
#endif
O compilador aponta erro nas duas linhas do arquivo beagle_spi.h:
- Código: Selecionar todos
SPI_t * spiopen (const ulong baseaddress);
ulong spigetc (SPI_t *spipointer, uint channel);
e nessas duas linhas do arquivo beagle_spi.c:
- Código: Selecionar todos
SPI_t * spiopen (const ulong baseaddress) {
ulong spigetc (SPI_t *spipointer, uint channel) {
O que eu to fazendo de errado? Nao to conseguindo perceber nada. Alguem poderia me dar uma ajuda?